A V Piling offer a range of piling services. Please click on any of the headings to read more.
Driven Cased Piling
The advantages off driven cased piling is its clean and tidy and less messy than SFA piling the light weight casing very manageable
And come in different sizes to suit different loads
Driven cased piles are normally used where the soils are soft
Using a internal drop hammer to drive the light weight casing to a solid set
Then designed steel is placed into the casing and concreted
Open Bore Piling
Open bore piling is suited for cohesive soils such as clay chalk and sandy materials
Rotating augers are used to give you an open bore
Once the required designed depth has been achieved a steel cage is lowered into the pile then filled with concrete.
We have to hand different sizes of open bore machines to suit the larger sites with good access and the mini ones for tight access sites like back gardens.
SFA Piling (Segmental Flight Augers)
SFA is mini grout piling used on smaller tighter sites where the soils are soft sandy water based clay or chalk
A hollow stem rotating auger is used to drill through the soft granular material to the designed depth then a grout mix is pumped down through the hollow stem augers filling the pile as the augers being extracted
Once all augers are out of the ground and all lose material have been removed from around the pile a steel cage is pushed into the wet grout to form a pile
CFA Piling (Continuous Flight Augers)
CFA piling has the same principle as SFA but use concrete instead grout
CFA rigs are bigger and better suited to larger sites
Screw Piling Screw Piling is a no mess no vibration system
Screw piles are screwed into the ground to the desired torque to achieve the pile working load
Screw piling needs no concrete or extra steel
Request a Quote
Complete the form below and we will send you a quote within 24 hours.